The spinneret ultrasonic cleaning machine can instantly produce more bubbles in the workpiece accessories. First, the pressure principle is applied to break and clean the bubbles. Therefore, the spinneret cleaning method is the cleaning method with the lowest damage rate to the workpiece at present

第一，在精细工业中具有良好的效果。在日常生活中，如玻璃清洗、精密仪器、工件清洗等，都需要这样的设备。你知道它的缺点吗?喷丝板超声波清洗机介绍了其四大缺点:一是清洗依从性强。多功率超声振荡器之所以被广泛应用于许多行业，是因为它具有很强的清洗依从性，不仅是多功率率用于清洗各种不同的工件。同时，板的尺寸和任务的频率也有良好的符合性，使设备能够在各种环境条件下继续工作。

First, it has good results in fine industry. Such equipment is needed in daily life, such as glass cleaning, precision instruments, workpiece cleaning, etc. Do you know its disadvantages? Spinneret ultrasonic cleaning machine introduces its four disadvantages: first, strong cleaning compliance. The reason why multi power ultrasonic oscillator is widely used in many industries is that it has strong cleaning compliance, not only multi power rate is used to clean various workpieces. At the same time, the size of the board and the frequency of the task also have good compliance, so that the equipment can continue to work under various environmental conditions.

第二空化力较强。少数超声波清洗产品以空化为技术中心，通过声压振动调节压力能量。多功率超声振荡器可根据实际情况，停止多功率调节，在保证空化力的前提下，瞬间消除气泡，达到快速高效清洗的目的。

Second, the cavitation force is strong. A few ultrasonic cleaning products take cavitation as the technical center and adjust the pressure energy through sound pressure vibration. The multi power ultrasonic oscillator can stop multi power regulation according to the actual situation, and instantly eliminate bubbles on the premise of ensuring the cavitation force, so as to achieve the purpose of rapid and efficient cleaning.

第三类产品残留率小，用于高精度清洁产品，但很多产品深度清洁效果不佳。具有良好的多功率和质量的超声振荡器可以突破这一瓶颈。经精细调理后，可将气泡提升至大间隙，并可停止彻底清洗。纯化后的物质在快速剥落后不易附着在工件上，所以纯化后的物质残留率较低。

The third kind of products have low residue rate and are used for high-precision cleaning products, but the deep cleaning effect of many products is poor. The ultrasonic oscillator with good multi power and quality can break through this bottleneck. After fine conditioning, the bubble can be lifted to a large gap and thorough cleaning can be stopped. The purified material is not easy to adhere to the workpiece after rapid peeling, so the residue rate of the purified material is low.

第四超声波振荡器具有良好的泡沫密度和高性价比的崎岖不平的操作可以确保设备,和振荡器可以形成一个密集的国际米兰阶段显示形式的泡沫,可用于精确有序停止清洗,然后通过高压气泡迅速打破,和几个大气压力发生实现高效清洁的目的。因此，超声振荡器的气泡密度高，清洗波动好。

Fourth the ultrasonic oscillator has a good foam density and cost-effective rugged operation to ensure that the device and oscillator can form a dense international Milan stage display form of foam, which can be used for precise and orderly stop cleaning, and then quickly break through high pressure bubbles, and achieve high efficiency and cleanliness with several atmospheric pressures. Therefore, the ultrasonic oscillator has high bubble density and good cleaning fluctuation.

如发现振荡器外部重要部件有污垢，应及时清理，特别是重要任务部件，应加以保护和爱护。严禁出现液体腐蚀现场。另外，清洗罐也要定期清洗。清洗后，应使用的吸力工具来吸收表面的水分。浸没式超声振荡器不仅可用于工业机械的除油除锈、纺织工业的喷丝板清洗等，而且在石油化工、半导体等行业也有推广作用。

If dirt is found on the external important parts of the oscillator, it shall be cleaned in time, especially the important task parts, which shall be protected and cherished. Liquid corrosion is strictly prohibited. In addition, the cleaning tank should also be cleaned regularly. After cleaning, professional suction tools shall be used to absorb the water on the surface. Immersion ultrasonic oscillator can be used not only for oil and rust removal of industrial machinery and spinneret cleaning of textile industry, but also in petrochemical, semiconductor and other industries.