为各企业量身定制非标高压喷淋清洗机，高压喷淋清洗线，不间断工作。适用于各个行业的拉伸件、压铸件清洗作业。可以加装电加热系统，可以设置恒温装置，广泛用于:五金制品行业、汽车零件行业等，投入成本低。

Tailor made non-standard high-pressure spray cleaning machines and high-pressure spray cleaning lines for various enterprises, ensuring uninterrupted operation. Suitable for cleaning stretching and die-casting parts in various industries. It can be equipped with an electric heating system and a constant temperature device, widely used in industries such as hardware products and automotive parts, with low investment costs.

特点

Characteristics

1.速度快，效果统一。

1. Fast speed and uniform effect.

2.具有清洗液喷洗、清水喷淋漂洗、吹水、热风吹干等功能的新颖连续式清洗设备。

2. A novel continuous cleaning equipment with functions such as spraying cleaning solution, rinsing with clean water, blowing water, and drying with hot air.

3.清洗机工作效率、温度可调。

3. The efficiency and temperature of the cleaning machine can be adjusted.

4.它对生产效率大大提高，节约成本。

4. It greatly improves production efficiency and saves costs.

清洗机的清洗步骤

Cleaning steps of the cleaning machine

各种喷淋清洗机的结构、作用可能有所不同，但主要工艺流程还是相同的，每个实际操作阶段都是存在的重要性，因此不仅不能忽视，而且一定要按照规定完成实际操作，确保理想的清洗效果。

The structure and function of various spray cleaning machines may vary, but the main process flow is still the same. The importance of each actual operation stage cannot be ignored, and it is necessary to complete the actual operation according to the regulations to ensure the ideal cleaning effect.

喷淋清洗机清洗的主要过程是湿热起泡，是将工件放入50～60℃的清洗液中浸泡，对工件进行初步清洗。这样做的意义很简单，为了减少喷淋清洗后的长度，提高清洗质量。

The main process of cleaning with a spray cleaning machine is wet and hot foaming, which involves immersing the workpiece in a cleaning solution at 50-60 ℃ for preliminary cleaning. The significance of doing so is simple, to reduce the length after spray cleaning and improve the cleaning quality.

之后是喷淋清洗机，立即组装在清洗槽底部的超声波换能器，与外部超声波换能器形成超声波清洗机。然后，用清洗液在40～50℃对工件进行超声波清洗。

Next is the spray cleaning machine, which immediately assembles an ultrasonic transducer at the bottom of the cleaning tank and forms an ultrasonic cleaning machine with an external ultrasonic transducer. Then, use cleaning solution to perform ultrasonic cleaning on the workpiece at 40-50 ℃.

下一步是喷涂并清洗防锈水，拔出喷涂储罐的防锈水，并根据喷嘴清洁工件。一方面是因为去除了工件表面的清洗液，另一方面是因为对工件进行了防锈处理。

The next step is to spray and clean the anti rust water, remove the anti rust water from the spray tank, and clean the workpiece according to the nozzle. On the one hand, it is because the cleaning solution on the surface of the workpiece has been removed, and on the other hand, it is because the workpiece has been treated with rust prevention.

由于喷淋清洗机后工件表面会有大量水滴，如果立即将此类物质放入干燥通道，其表面将保留液态汞太长时间，因此可以在一个槽中干燥，通过离心风机轻轻干燥工件表面水，然后进入干燥通道。

Due to the large amount of water droplets on the surface of the workpiece after the spray cleaning machine, if such substances are immediately placed in the drying channel, the surface will retain liquid mercury for too long. Therefore, it can be dried in a tank by gently drying the surface water of the workpiece with a centrifugal fan, and then entering the drying channel.

干燥通道包含电热管，并外部使用保温隔热材料，因此根据离心风机底部的排气、顶部的空气进入的方法来产生一个暖风循环系统，使环境温度在干燥通道中均匀分布，然后用喷淋清洗机将清洗后的工件擦干。

The drying channel contains electric heating tubes and is externally insulated with thermal insulation materials. Therefore, a warm air circulation system is generated by the exhaust from the bottom of the centrifugal fan and the air entering from the top, so that the ambient temperature is evenly distributed in the drying channel. Then, the cleaned workpiece is dried with a spray cleaning machine.

本文由喷淋清洗机友情奉献.更多有关的知识请点击:http://www.sinokohl.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from the spray cleaning machine For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message