如今大家早已进入了技术时代，包括服饰、食品类别、机械结构等，现阶段超声波清洗机已广泛应用于表面镀膜、机械制造、电子元器件制造、医疗器械制造、半导体制造、表业和珠宝眼镜制造、纺织品制造和染色等加工元器件制造领域，使超声波清洗机清理的实际效果很好，也是有一些要素会使清洗设备的清理效果并不是很好。

Now everyone has already entered the era of technology, including clothing, food category, mechanical structure, etc. at this stage, ultrasonic cleaning machines have been widely used in surface coating, machinery manufacturing, electronic component manufacturing, medical device manufacturing, semiconductor manufacturing, watch and jewelry manufacturing, textile manufacturing, dyeing and other processing component manufacturing fields, Make the actual effect of ultrasonic cleaning machine cleaning is very good, but also some elements will make the cleaning effect of cleaning equipment is not very good.

1、机器设备所设置的时间长短

1. The length of time set by the machine and equipment

由于超声波清洗机的设置时间过短，产品工件没法清理干净；清理过程太长期会造成气穴现象并危害表层光滑度，因而清理不一样构件的时间设置会各有不同，充足的时间更有益于省时省力和达到适宜实际效果，因为每一个机器设备的化学性质是不一样的，以在清理全过程中被挑选不一样的清理温度，否则用水或超声波清洁器清洗，由于气穴引起的物理清洗，其抗压强度明显高于低频率。

Because the setting time of the ultrasonic cleaning machine is too short, the product workpiece cannot be cleaned; If the cleaning process is too long, it will cause cavitation and damage the smoothness of the surface layer. Therefore, the time setting for cleaning different components will be different. Sufficient time is more conducive to saving time and effort and achieving the appropriate practical effect, because the chemical properties of each machine and equipment are different, so that different cleaning temperatures can be selected in the whole cleaning process, Otherwise, the compressive strength of water or ultrasonic cleaner is higher than that of low frequency due to cavitation.
              

2、清洗空间的大小

2. Size of cleaning space

对于室内空间狭小，深层次的空隙孔，如果清理频率不当，容易导致清理不全部，从而获得足够的清理实际效果，并避免与清理目标相冲突，清理液被适当地选择，它的选择也有利于清理部件的其他成分，超声波清洗机是在清理部件的设计方案中使用的设备，而清理模块则是超声波清洗，当在储水箱内时，清理部件或清理工作不可触碰储水箱底端。

If the cleaning frequency is not appropriate, it is easy to lead to incomplete cleaning, so as to obtain enough actual cleaning effect and avoid conflict with the cleaning target. The cleaning fluid is properly selected, which is also conducive to the cleaning of other components. Ultrasonic cleaning machine is a professional equipment used in the design of cleaning components, The cleaning module is ultrasonic cleaning, when in the water storage tank, cleaning parts or cleaning work can not touch the bottom of the water storage tank.

选用密封环时，清理控制模块的总横截面应不超过超声波槽横截面占地面积的70%，橡胶材料和非弯曲刚度塑胶将消化吸收超声波机械能，绝缘层清理构件也应造成需注意，假如应用有误或产品工件过重，会导致超声波清洗机系统软件的效率减少。

When selecting the sealing ring, the total cross section of the cleaning control module should not exceed 70% of the area of the cross section of the ultrasonic tank. The rubber material and non bending rigidity plastic will digest and absorb the ultrasonic mechanical energy. The cleaning components of the insulation layer should also cause problems. If the application is wrong or the product parts are too heavy, the efficiency of the system software of the ultrasonic cleaning machine will be reduced.