According to the operation instructions of the single tank ultrasonic cleaning machine, the operation steps are as follows. First, configure the cleaning solution first, add an appropriate amount of clean water and detergent into the cleaning tank to ensure that the cleaning solution can soak the electrical circuit to be cleaned and stir it. Second, turn on the single tank ultrasonic cleaning machine, adjust the temperature control button and set the cleaning solution temperature. The specific temperature should be determined according to the active temperature of the cleaning agent. Third, after the cleaning fluid reaches the set temperature, put the electrical circuit into the cleaning tank to ensure that all the circuits are filled with cleaning fluid. Fourth, adjust the cleaning power and cleaning time, and press the cleaning button.

当单槽式超声波清洗机清洗时间一到，人们需关闭超声波电源，停止清洗，将温度控制按钮复位，停止恒温控制。随后将电气线路从清洗槽中取出，并且利用清水进行冲洗，将线路表面的残留污垢和清洗液清洗干净。再然后是将清洗槽中的污水排放干净并且清洁清洗槽，清洗过后要将清洗槽擦干。为了保护单槽式超声波清洗机，在不使用它时应该将其放在干净、干燥的场所，防止其电路受潮。

When the cleaning time of the single tank ultrasonic cleaning machine comes, people need to turn off the ultrasonic power supply, stop cleaning, reset the temperature control button and stop the constant temperature control. Then take out the electrical circuit from the cleaning tank and wash it with clean water to clean the residual dirt and cleaning solution on the circuit surface. Then discharge the sewage in the cleaning tank and clean the cleaning tank. After cleaning, wipe the cleaning tank dry. In order to protect the single tank ultrasonic cleaning machine, it should be placed in a clean and dry place when it is not used to prevent its circuit from moisture.

单槽式超声波清洗机的工作原理是怎样的呢？下面为大家介绍下其工作的主要环节和步骤，超声波清洗机如何工作的原理及知识。超声波清洗机原理主要是将换能器，将功率超声频源的声能，并且要转换成机械振动，通过清洗槽壁使之将槽子中的清洗液辐射到超声波。由于受到辐射的超声波，使之槽内液体中的微气泡能够在声波的作用下从而保持振动。 超声波清洗机—强劲超声波清洗机

What is the working principle of single tank ultrasonic cleaning machine? The following will introduce the main links and steps of its work, the principle and knowledge of how the ultrasonic cleaning machine works. The principle of ultrasonic cleaning machine is mainly to convert the transducer to the sound energy of the power ultrasonic frequency source and convert it into mechanical vibration, so as to radiate the cleaning liquid in the tank to ultrasonic through the cleaning tank wall. Due to the radiated ultrasonic, the microbubbles in the liquid in the tank can keep vibrating under the action of sound waves. Ultrasonic cleaning machine - powerful ultrasonic cleaning machine

不使用--参考图片组合.jpg当声压或者声强受到压力到达一定程度时候，气泡会迅速膨胀，然后又突然闭合。在这段过程中，气泡闭合的瞬间产生冲击波，使气泡周围产生1012-1013pa的压力及局调温，这种超声波空化所产生的巨大压力能破坏不溶性污物而使他们分化于溶液中，蒸汽型空化对污垢的直接反复冲击。

Not used -- refer to picture combination. JPG when the sound pressure or sound intensity is under pressure to a certain extent, the bubble will expand rapidly and then close suddenly. In this process, the shock wave is generated at the moment of bubble closure, resulting in 1012-1013 PA pressure and local temperature regulation around the bubble. The huge pressure generated by ultrasonic cavitation can destroy insoluble dirt and make them differentiate into solution. The direct reverse impact of steam cavitation on dirt.

清洗范围

Cleaning range

适用于电子、机械、汽车、电镀、化纤、光学、清洗线路板、磁芯、油嘴、汽车零配件、汽车维修、电镀五金工具、化纤喷丝板、光学镜片、轴承、工具、餐具、医疗器械、精密五金、钟表零件、金银饰品、电子元件等。

It is applicable to electronics, machinery, automobile, electroplating, chemical fiber, optics, cleaning circuit board, magnetic core, nozzle, automobile spare parts, automobile maintenance, electroplating hardware tools, chemical fiber spinneret, optical lens, bearings, tools, tableware, medical instruments, precision hardware, clock parts, gold and silver jewelry, electronic components, etc.

优点

advantage

清洗效果好、效率高、、成本低、清洗效果平均

Good cleaning effect, high efficiency, environmental protection, low cost and average cleaning effect

规格资料编辑

Specification data editing

1. 内槽尺寸：（超声波）长*宽*深：L500*W400*D500mm

1. Inner groove size: (ultrasonic) length * width * depth: L500 * W400 * d500mm

2. 外型尺寸：长*宽*深：L680*W540*D720mm

2. Overall dimension: length * width * depth: L680 * w540 * d720mm

3.外体钢材：1.2mm厚度Nissan#304不锈钢片

3. External steel: 1.2mm thick nissan#304 stainless steel sheet

4. 内槽钢板：2.0mm厚度Nissan #316不锈钢片

4. Inner groove steel plate: 2.0mm thick Nissan #316 stainless steel sheet

5.超音波换能器数量：24枚

5. Number of ultrasonic transducers: 24

6.振动面钢板：底部安装,电镀硬铬

6. Vibrating surface steel plate: installed at the bottom and plated with hard chromium

7.加热功率：安装三块1500铸铝发热板

7. Heating power: install three 1500 cast aluminum heating plates

8.超声波时间控制：配备进口控制器

8. Ultrasonic time control: equipped with imported controller

9.超音波信号发生器：外置式功率可调发声器

9. Ultrasonic signal generator: external power adjustable sounder

10.超音波讯号线：屏蔽式讯号线,6米

10. Ultrasonic signal line: shielded signal line, 6M

11.超音波电源要求：AC220V 6A

11. Ultrasonic power requirements: AC220V 6A

12.发热电源要求：AC220V 30A

12. Heating power requirements: AC220V 30A