Plastic tanks are not suitable for ultrasonic applications because they inhibit ultrasonic waves, reducing the available ultrasonic cleaning power from 60% to 90%.

潜式(或immersible)清洗系统由超声波发生器供电，这些发电机由304或316不锈钢制成的传感器包装。这些包包含一个双堆栈洁升超声波率超声换能器。它们通常安装在底部或现有水箱的侧壁，以促进均匀分布的超声波清洗在其被淹没的超声波清洗机。传感器包带有特殊的带孔的安装标签，并设计为性地附加在油箱上。

The submersible (or immersible) cleaning system is powered by ultrasonic generators, which are packaged with sensors made of 304 or 316 stainless steel. These packages contain a dual stack clean lift ultrasonic high efficiency ultrasonic transducer. They are usually installed at the bottom or the side wall of the existing water tank to promote the uniform distribution of ultrasonic cleaning in its submerged ultrasonic cleaning machine. The sensor package has a special mounting label with holes and is designed to be permanently attached to the fuel tank.

潜水系统配有25kHz，40kHz，80kHz，或交叉火力多频超声波系统。

The diving system is equipped with 25kHz, 40KHz, 80kHz, or cross fire multi frequency ultrasonic system.

您选择的频率将决定您安装的换能器包的大小。大多数测量3-4“高，这是与您将失去的空间数量，您将失去在现有的超声波清洗机，一旦潜水清洁系统安装。

The frequency you choose will determine the size of the transducer package you install. Most measure 3-4 "high, which is the amount of space you will lose, and you will lose in the existing ultrasonic cleaning machine once the diving cleaning system is installed.

洁升超声波技术人员将帮助双方确定哪一频率是好的具体应用，并决定佳位置安装传感器包在您的超声波清洗机。

Jiesheng ultrasonic technicians will help both parties determine which frequency is good for specific applications, and decide the best location to install the sensor package in your ultrasonic cleaning machine.

该传感器包通过射频屏蔽电缆连接到超声波发生器，该电缆配有快速断开装置。有两种方法可以将电缆传递到水箱中：通过舱壁安装(基本上是一个密封的孔)通过底部的水箱，或者通过我们称之为的立管，它看起来有点像一种由不锈钢制成的刚性的潜水，它通过了。超声波清洗机的顶部。

The sensor package is connected to the ultrasonic generator through an RF shielded cable equipped with a quick disconnect device. There are two ways to transfer the cable to the water tank: through the bulkhead installation (basically a sealed hole), through the bottom water tank, or through what we call the riser. It looks a bit like a rigid diving made of stainless steel. It passes through. The top of the ultrasonic cleaning machine.

这两种进入路线都有正反两面。许多客户更喜欢购买立管式变频器，因为他们不想在他们的油箱底部制造一个洞。使用立管的主要缺点是它们可能会干扰安装在顶部的盖子或其他系统部件。大多数洁升超声波潜水器是定制制造的，目的是大限度地发挥超声波系统的效能，并尽量减少可能的死点。我们是一家提供这项服务的制造商。我们还有一套标准的超声波潜水系统。

Both entry routes have pros and cons. Many customers prefer to buy riser converters because they don't want to make a hole in the bottom of their tank. The main disadvantage of using risers is that they may interfere with top mounted covers or other system components. Most Jiesheng ultrasonic submersibles are custom-made to maximize the effectiveness of the ultrasonic system and minimize possible dead spots. We are the only manufacturer to provide this service free of charge. We also have a standard ultrasonic diving system.

以上是今天小编给大家提供的精彩内容，更多的精彩内容请点击进入我们的网站：超声波清洗机http://www.sinokohl.com

The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: price of ultrasonic cleaning machine http://www.sinokohl.com