Wire ultrasonic cleaning machine is widely used in our life. Do you know how the ultrasonic cleaning machine works for cleaning circuit boards? Now let's give you a detailed introduction. Hurry to follow us to learn about it.

1.半水清洗技术

1. Semi water cleaning technology

半水清洗采用以有机溶剂和去离子水为主的清洗剂，外加定量的活性剂和助剂。这种清洗方式介于溶剂清洗和水清洗之间。所有这些清洗剂都是有机溶剂，易燃溶剂，火花比较大，毒性较小，线路板超声波清洗机使用相对，但要用水清洗和干燥。

Semi water cleaning uses cleaning agents based on organic solvents and deionized water, plus quantitative activators and additives. This cleaning method is between solvent cleaning and water cleaning. All these cleaning agents are organic solvents, flammable solvents, with large sparks and low toxicity. The circuit board ultrasonic cleaning machine is relatively safe to use, but it should be cleaned and dried with water.

2.水清洗技术；水清洗技术是未来清洗技术发展的方向，需要设立纯水水源及废水处理车间。以水为清洗介质，向水中加入表面活性剂、添加剂、防腐蚀剂等，形成一系列含水清洗剂。可去除电路板水溶剂和非极性污染物。

2. Water cleaning technology; Water cleaning technology is the development direction of cleaning technology in the future, which requires the establishment of pure water sources and wastewater treatment workshops. With water as the cleaning medium, surfactants, additives, corrosion inhibitors, etc. are added to the water to form a series of aqueous cleaning agents. It can remove water solvents and non-polar pollutants from circuit boards.

线材超声波清洗机

Wire ultrasonic cleaning machine

3.免清洗技术；清灰过程使用非海上助焊剂或非海上泥浆。线路板超声波清洗机直接进入下一个进程，电路板将不再被清理。今天，清洁技术是常用的替代，特别是移动通信产品，基本上是的。更换ODS的清洗方法。

3. Cleaning free technology; Non offshore flux or non offshore slurry is used in the ash removal process. The circuit board ultrasonic cleaning machine directly enters the next process, and the circuit board will no longer be cleaned. Today, clean technology is a common alternative, especially mobile communication products, which are basically free. Replace the cleaning method of ODS.

4.溶剂清洗技术；溶剂清洗主要是用溶剂溶剂来去除电路板污染物。由于挥发速度快，清洗溶剂的溶解度高，线路板超声波清洗机要求简单。

4. Solvent cleaning technology; Solvent cleaning mainly uses solvent to remove pollutants from circuit boards. Due to the fast volatilization speed and high solubility of cleaning solvent, the requirements of circuit board ultrasonic cleaning machine are simple.

线材超声波清洗机利用超声波在高频率下转化为电机能量，作用于液体介质，产生空化，形成并爆裂无数微气泡，冲击物体表面，去除表面污渍，起到清洗作用。由于液体的作用，与液体接触的物体的表面被冲洗而不会留下死角。此外，线路板超声波清洗机可以同时作用于多个对象的各个表面，非常快速。清洁通常需要15分钟。使用线路板超声波清洗机的另一个优点是，它能有效去除氧化，提高垫和零件销的剃须能力，并减少电磁干扰。

Wire ultrasonic cleaning machine uses ultrasonic wave to convert into motor energy at high frequency, acts on liquid medium, produces cavitation, forms and bursts countless microbubbles, impacts the surface of objects, removes surface stains, and plays a cleaning role. Due to the action of the liquid, the surface of the object in contact with the liquid is washed without leaving a dead corner. In addition, the circuit board ultrasonic cleaning machine can act on all surfaces of multiple objects at the same time, which is very fast. Cleaning usually takes 15 minutes. Another advantage of using circuit board ultrasonic cleaning machine is that it can effectively remove oxidation, improve the shaving ability of pads and parts pins, and reduce electromagnetic interference.

以上是为大家介绍的有超声波清洗设备的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sinokohl.com

The above is a detailed introduction of ultrasonic cleaning equipment for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.sinokohl.com