具体的清洗时间要根据清洗工件结构、材质、油污及清洗方式的不同，所需的清洗时间也会有所差异。一般来说，油污较重零件的清洗时间可适当延长，油污较轻易于清洗的可缩短清洗时间；清洗的同时，还要保证清洗的效率，所以清洗时间是根据清洗实际效果而定，并非一成不变的。相反，如果刻意延长了清洗时间，工件表面长时间摩擦，还可能会导致工件表面损伤。

The specific cleaning time depends on the structure, material, oil stains, and cleaning method of the cleaned workpiece, and the required cleaning time may also vary. Generally speaking, the cleaning time for parts with heavy oil stains can be appropriately extended, while for parts with light oil stains that are easy to clean, the cleaning time can be shortened; While cleaning, it is also necessary to ensure the efficiency of the cleaning, so the cleaning time is determined based on the actual cleaning effect and is not fixed. On the contrary, if the cleaning time is deliberately extended, prolonged friction on the surface of the workpiece may also lead to surface damage.

碳氢清洗机佳清洗温度？

What is the optimal cleaning temperature for hydrocarbon cleaning machines?

正常情况下，低闪点的碳氢清洗剂是不允许加温清洗的。高闪点碳氢清洗剂加温对温度的控制非常关键，如果是初次加温使用，请务必由专业的技术人员进行指导操作，并做好安全防范工作。

Under normal circumstances, low flash point hydrocarbon cleaning agents are not allowed to be heated for cleaning. The heating of high flash point hydrocarbon cleaning agents is crucial for temperature control. If it is the first time using them for heating, it is necessary to have professional technical personnel guide the operation and take safety precautions.

清洗温度主要取决于所用碳氢清洗剂的清洗工艺及闪点。随着加温温度的提升，一般情况下碳氢清洗剂的清洗力是有一定程度提升的，但由于碳氢有可燃性，清洗温度越高碳氢蒸汽挥发越快，所以在加温的同时需要严格把控加温温度。

The cleaning temperature mainly depends on the cleaning process and flash point of the hydrocarbon cleaning agent used. As the heating temperature increases, the cleaning power of hydrocarbon cleaning agents generally improves to a certain extent. However, due to the combustibility of hydrocarbons, the higher the cleaning temperature, the faster the evaporation of hydrocarbon vapor. Therefore, strict control of the heating temperature is required while heating.

一般来说，碳氢清洗温度控制比碳氢闪点低约15℃，这样安全隐患相对会小一些。因此，需要综合考虑碳氢清洗工艺及闪点的性质，从而设定产品的清洗温度。

Generally speaking, the temperature control for hydrocarbon cleaning is about 15 ℃ lower than the flash point of hydrocarbons, which reduces safety hazards relatively. Therefore, it is necessary to comprehensively consider the properties of hydrocarbon cleaning process and flash point, in order to set the cleaning temperature of the product.

碳氢清洗机清洗方式

Cleaning method of hydrocarbon cleaning machine

目前碳氢清洗剂常见的清洗方式主要分为：超声波清洗、真空超声波清洗机清洗，具体选择哪种清洗工艺则要结合需要清洗的工件和原有的清洗工艺来决定。

At present, the common cleaning methods for hydrocarbon cleaning agents are mainly divided into ultrasonic cleaning and vacuum ultrasonic cleaning machine cleaning. The specific choice of cleaning process depends on the workpiece to be cleaned and the existing cleaning process.

不同的清洗方式也有其各自的特点。

Different cleaning methods also have their own characteristics.

超声波清洗分为普通超声波清洗与真空超声波清洗。

Ultrasonic cleaning is divided into ordinary ultrasonic cleaning and vacuum ultrasonic cleaning.

普通超声波清洗，设备资金投入较少，可手动操作，灵活便捷。但清洗剂损耗与换液频率相对较高。对有盲孔的产品清洗力较弱。

Ordinary ultrasonic cleaning requires less investment in equipment, can be manually operated, and is flexible and convenient. However, the loss of cleaning agents and the frequency of liquid changes are relatively high. Weak cleaning power for products with blind holes.

真空超声波清洗，投入的资金相对较大，通常是自动化清洗，使用简单方便。清洗剂的损耗和换液频率都较低，对有盲孔的产品清洗效果较好，清洗品质更稳定，安全性也更强。

Vacuum ultrasonic cleaning requires relatively large investment and is usually automated, making it simple and convenient to use. The loss of cleaning agents and the frequency of liquid change are relatively low, which has a better cleaning effect on products with blind holes, a more stable cleaning quality, and stronger safety.

本文由碳氢清洗机提供技术支持，更多的详细精彩内容请点击我们的网站 http://www.sinokohl.com/我们将会全心全意为您提供满意的服务。

This article is supported by hydrocarbon cleaning machines. For more detailed and exciting content, please click on our website http://www.jnthcsb.com We will wholeheartedly provide you with satisfactory service.