服务热线电话

400-6188-756

全自动超声波清洗机的运转有哪些注意事项

来源:http://www.sinokohl.com/ 时间: 2021-08-24 浏览次数: 0

假使全自动超声波清洗机操作不当,将危害清洗设备的一切正常实际操作和应用,为了很好地保证清洗设备具体应用的实际效果,能够没有过相同层次的认识,包括全自动超声波清洗机的功率、超声波频率机温及其他因素,应用清洗设备温度越高,对污渍溶解越有利,但当温度达到一定的范围,则会危害清洗设备的超声波功效,降低清洗的实际效果。
If the full-automatic ultrasonic cleaning machine is not operated properly, it will endanger all the normal actual operation and application of the cleaning equipment. In order to ensure the actual effect of the specific application of the cleaning equipment, we can not have the same level of understanding, including the power, ultrasonic frequency, machine temperature and other factors of the full-automatic ultrasonic cleaning machine. The higher the temperature of the applied cleaning equipment, The more beneficial it is to the stain dissolution, but when the temperature reaches a certain range, it will endanger the ultrasonic effect of the cleaning equipment and reduce the actual effect of cleaning.
清洁设备的清理时间越长,实际清理效果越好,除材料外,还有许多因素会造成危害,如清洁液的种类和污渍,应用大功率的清洁剂来清洗不能清洗的部件,而应用小功率的精细部件,频率越低蒸发越好,频率越高实际效果越好,对于简单的表面层应用低频,对于繁杂的表层和深孔,要用大功率清洁剂来清洗,因为大功率清洁剂使用时,会发出渗漏声,而且清洁剂很容易清洗。
The longer the cleaning time of the cleaning equipment, the better the actual cleaning effect. In addition to the materials, there are many factors that will cause harm, such as the type of cleaning solution and stains, the use of high-power detergent to clean the parts that cannot be cleaned, while the use of small-power fine parts, the lower the frequency, the better the evaporation, the higher the frequency, the better the actual effect. For simple surface layers, the application of low frequency, For complicated surface and deep holes, use high-power cleaner to clean, because when high-power cleaner is used, it will make leakage sound, and the cleaner is easy to clean.
在全自动超声波清洗机工作时,尽可能不必上升温度以避免一切正常运作,务必操纵清洁剂的系数,禁止在超声波清洗机中出现别的异常物件,应常常维护和保养全自动超声波清洗机,有脏东西落入罐底应该马上删掉,变更或排尽清洁液要开展设备维护保养清洗用品在室内温度下的罐里。
When the full-automatic ultrasonic cleaning machine is working, it is not necessary to raise the temperature as much as possible to avoid all normal operation. Be sure to control the safety factor of the cleaning agent. It is prohibited to have other abnormal objects in the ultrasonic cleaning machine. The full-automatic ultrasonic cleaning machine should be maintained and maintained frequently. If dirt falls into the tank bottom, it should be deleted immediately, When changing or draining the cleaning liquid, equipment maintenance shall be carried out, and the cleaning supplies shall be in the tank at indoor temperature.
当全自动超声波清洗机一切正常工作时,应听见超音波和储罐的匀称响声,不拌和清洁液的表层,只有在扫出气孔造成的洒水,在确保清理物件清理的前提条件下,尽量不加温和间歇性,工作中由于加温和长期超声波会提升储水箱内的温度。
When the full-automatic ultrasonic cleaning machine works normally, it shall hear the symmetrical sound of ultrasonic wave and storage tank. The surface layer of cleaning solution is not mixed. Only the water spraying caused by scavenging the air hole. On the premise of ensuring the cleaning of cleaning objects, it shall not be heated and intermittent as far as possible. During operation, the temperature in the water storage tank will be increased due to heating and long-term ultrasonic wave.

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号