In the process of using ultrasonic, we often encounter some problems, such as the indicator light of ultrasonic cleaning machine is on, but there is no ultrasonic output. What is the reason?

一、换能器出现故障

1、 Transducer failure

出现这种问题很可能是超声波清洗机换能器出现故障，操作人员应该查看换能器与超声波功率板的连接插头，看看插头是否松脱。超声波换能器是比较容易受潮的，通过检查，如果不是因为受潮而不能正常工作，那么很可能是换能器损坏了，要及时更换新的换能器。

This problem is likely to be caused by the failure of the transducer of the ultrasonic cleaning machine. The operator should check the connecting plug between the transducer and the ultrasonic power board to see if the plug is loose. The ultrasonic transducer is relatively susceptible to moisture. Through inspection, if it is not because of moisture and can not work normally, it is likely that the transducer is damaged, and it is necessary to replace it with a new one in time.

二、换能器振子烧坏

2、 Transducer vibrator burnt out

出现这种问题也可能是换能器振子脱胶，导致振子和振动面连接不好，终烧坏振子。操作人员是可以用万用表来检测振子是否出现断路，如果烧坏要及时维修。

This problem may also be caused by the degumming of the transducer vibrator, resulting in poor connection between the vibrator and the vibrating surface, and finally burning the vibrator. The operator can use a multimeter to detect whether the vibrator is open circuit. If it is burnt out, it should be repaired in time.

除此之外，还有可能是稳压管损坏，或者是电感以及隔离变压器被烧毁。出现这种问题，超声波清洗机操作人员一定要查明原因，及时解决。

In addition, there may be damage to the regulator, or the inductance and isolation transformer may be burned. In case of such a problem, the operator of the ultrasonic cleaning machine must find out the cause and solve it in time.

以上就是为大家介绍的有关全自动超声波清洗机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sinokohl.com

The above is a detailed introduction about the full-automatic ultrasonic cleaning machine for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.sinokohl.com