电控柜与清洗主机相分离，杜绝水的泄漏和喷溅以防电器件受潮。
The electric control cabinet is separated from the cleaning host to prevent water leakage and splashing to prevent electrical parts from being damped.
合理布局电控柜，留出合理通风空间
Reasonably arrange the electric control cabinet and reserve reasonable ventilation space
在柜内加装带滤网的通风扇，加装带滤网的百叶窗等
Install ventilation fan with filter screen and shutter with filter screen in the cabinet
加强管道布线和设备连线时的防水处理
Strengthen the waterproof treatment when piping and equipment wiring
针对现场实际，留出可变高度的走行式电控柜地脚; 为加强系统的内在可靠性，加强了以 PLC 为核心的抗干扰措施
According to the actual situation on site, set aside walking type electric control cabinet feet with variable height; In order to strengthen the internal reliability of the system, anti-interference measures with PLC as the core have been strengthened
轴承清洗常见应用方式
Common application methods of bearing cleaning

由于轴承零件的大小不一，在选择清洗机的时候需要选择不同的清洗机，前序加工的方式，使得残留在零件表面的污渍不尽相同。这样直接影响到清洗效果，在选择碳氢清洗机时也当考虑到清洗机的清洗方式和单槽或者多槽的清洗是否能够满足清洗需要。目前清洗机设备厂已经积累了足够的经验，可以根据清洗需要定制合适的设备。通常情况下，轴承清洗应用中，典型应用有以下几种碳氢清洗机：
Due to the different sizes of bearing parts, different cleaning machines need to be selected when selecting cleaning machines. The way of previous processing makes the stains left on the surface of parts different. This directly affects the cleaning effect. When selecting a hydrocarbon washer, consider whether the cleaning method of the washer and the cleaning of single tank or multiple tanks can meet the cleaning needs. At present, the washer equipment factory has accumulated enough experience to customize appropriate equipment according to the cleaning needs. In general, in the application of bearing cleaning, the following hydrocarbon cleaning machines are typical applications:
通过式碳氢清洗设备
Through type hydrocarbon cleaning equipment
通过式清洗目前在轴承清洗行业中应用较为普遍，此类清洗设备的应用非常灵活，根据轴承和被清洗物的多少确定不同的清洗流程，将喷淋漂洗不同组合清洗，后由热风或者其他方式干燥，清洗效率较高，可以批量清洗零件，缺点是设备较大，占空间较大。
At present, through cleaning is widely used in the bearing cleaning industry. The application of such cleaning equipment is very flexible. Different cleaning processes are determined according to the number of bearings and objects to be cleaned. Different combinations of spray rinsing are used for cleaning. Finally, hot air or other methods are used for drying. The cleaning efficiency is high, and parts can be cleaned in batches. The disadvantage is that the equipment is large and takes up large space.
对于洁净度要求较高的轴承清洗，使用三槽式或者多槽式碳氢清洗机。此设备采用抽真空超声清洗，摇动漂洗，抽真空状态下真空蒸汽清洗，真空干燥等步骤，超声波清洗气相清洗组合，零件洁净度更高。真空情况下干燥和回收更。
For bearing cleaning with high cleanliness requirements, use a three groove or multi groove hydrocarbon cleaning machine. This equipment adopts vacuum ultrasonic cleaning, shaking rinsing, vacuum steam cleaning under vacuum state, vacuum drying and other steps. The combination of ultrasonic cleaning and vapor cleaning makes the parts cleaner. Drying and recycling in vacuum can save energy.
以上的精彩内容来自：碳氢清洗机济南科尔超声波设备有限公司专注通风管道多年，质量保证,服务完善,欢迎更多客户点击：http://www.sinokohl.com
The above highlights come from: Jinan Keer Ultrasonic Equipment Co., Ltd. has been focusing on ventilation ducts for many years, with quality assurance and perfect service. Welcome more customers to click: http://www.sinokohl.com