1．清洗更干净
1. Cleaner cleaning
超声波清洗机原理表明该种方式非常适合清洗形状复杂的构件。这类零部件若用人工清洗，有很多部位是难以或无法清洗到的。清洗剂只能溶解部分污垢，对于顽固污垢及零件内部的污垢也是力不从心。超声波清洗机技术清洗是一种奇妙的物理清洗，犹如无数小炸弹同时爆破物体的内外表面，如再结合清洗剂的化学清洗，因此可以使传统方法无法完成的内表面及内孔的清洗一次完成。
The principle of ultrasonic cleaning machine shows that this method is very suitable for cleaning components with complex shapes. If such parts are cleaned manually, many parts are difficult or impossible to clean. The cleaning agent can only dissolve part of the dirt, and it is also inadequate for stubborn dirt and dirt inside the parts. The technical cleaning of ultrasonic cleaning machine is a kind of wonderful physical cleaning. It is like the blasting of countless small bombs to remove the internal and external surfaces of objects at the same time. For example, the chemical cleaning combined with cleaning agent can make the cleaning of internal surfaces and holes that cannot be completed by traditional methods be completed at one time.
2．节约能源
2. Energy conservation
小型零部件的清洗目前多使用汽油或柴油刷洗，因此操作系数很低，易造成事故。而超声波技术清洗使用水基清洗剂，无事故隐患。
At present, small parts are mostly cleaned with gasoline or diesel oil, so the operation safety factor is very low, which is easy to cause accidents. However, the ultrasonic technology uses water-based cleaning agent, which has no potential accident.
3．工作效率高
3. High efficiency
只需将零部件解体后放在清洗机的丝网料筐中并按一下开关即可自动清洗。
Simply disassemble the parts and put them in the wire mesh basket of the cleaning machine and press the switch to clean them automatically.

4．清洗成本低
4. Low cleaning cost
因清洗剂重复使用率高，耗材采购廉价， 在所有清洗方式中，清洗成本大体可分为：设备成本和消耗成本。超声波清洗机设备使用寿命约为十年，除设备购置成本高于手工清洗和有机碱性溶剂刷洗外，低于气相清洗和高压水射流清洗。
Due to the high reuse rate of cleaning agent and the low cost of consumables, the cleaning cost can be divided into equipment cost and consumption cost in all cleaning methods. The service life of the ultrasonic cleaning machine is about 10 years, which is lower than gas phase cleaning and high-pressure water jet cleaning except that the equipment purchase cost is higher than manual cleaning and organic alkaline solvent brushing.
5.清洗效果好：清洗方式而言，运用于工业清洗的清洗方式一般为手工清洗，有机溶剂清洗，蒸汽气相清洗，高压水射流清洗和超声波清洗，根据清洗效果可以明显地区分清洗的方式，超声波清洗机被国际公认为当前效率较高，效果较好的清洗方式，其清洗效率达到了98%以上，清洗洁净度也达到了较别，而传统的手工清洗和有机溶剂清洗的清洗效率仅仅为60%-70%，即使是气象清洗和高压水射流清洗的清洗效率也低于90%，因此，在工业清洗中，超声波清洗机以其效率高，效果好，适用于大工作量清洗的特性无疑是清洗的较佳选择，这也是为什么凡是对洁净度要求高的行业。
5. Good cleaning effect: In terms of cleaning methods, the cleaning methods used for industrial cleaning are generally manual cleaning, organic solvent cleaning, steam vapor phase cleaning, high-pressure water jet cleaning and ultrasonic cleaning. According to the cleaning effect, the cleaning methods can be clearly distinguished. The ultrasonic cleaning machine is internationally recognized as the current cleaning method with high efficiency and good effect, and its cleaning efficiency reaches more than 98%, The cleaning cleanliness has also reached a higher level, while the cleaning efficiency of traditional manual cleaning and organic solvent cleaning is only 60% - 70%, and even the cleaning efficiency of meteorological cleaning and high-pressure water jet cleaning is less than 90%. Therefore, in industrial cleaning, ultrasonic cleaning machine is undoubtedly a better choice for cleaning with its high efficiency and good effect, and is suitable for heavy workload cleaning, This is why all industries with high requirements for cleanliness.
济南科尔超声波设备有限公司专注通过式清洗机的生产发展服务,更多精彩内容请点击:http://www.sinokohl.com
Jinan Keer Ultrasonic Equipment Co., Ltd. focuses on the production and development services of walk-through cleaning machines. For more highlights, please click: http://www.sinokohl.com