本设备是通过使用发电厂从高压活塞泵产生高压水来冲击地面的机器。它可去除污垢并将其清洗干净，以清洁物体表面。这种清洗方法对设备的材料，特性，形状和污垢类型没有特殊要求，只需要直接注射，因此应用非常广泛。由于使用高压水柱清洁污垢，高压清洁也被认为是科学，经济和环保的清洁方法之一。

This equipment is a machine that uses a power plant to generate high-pressure water from a high-pressure piston pump to impact the ground. It can remove dirt and clean it thoroughly to clean the surface of objects. This cleaning method has no special requirements for the material, characteristics, shape, and type of dirt of the equipment, and only requires direct injection, so it is widely used. Due to the use of high-pressure water columns to clean dirt, high-pressure cleaning is also considered one of the scientific, economical, and environmentally friendly cleaning methods.

它的清洗系统负责零部件的清洗工作，是整个清洗机的核心。基于不同原理的通用、柔性、超声波等清洗机的差别主要体现清洗系统上。清洗系统工艺繁多，例如喷射类清洗系统根据不同零件以及同一零件各个部位的不同清洗要求，有高、低压喷射清洗工艺以及定点、定位清洗中的插洗、堵洗等工艺。为提高零件及部件总成清洁度，在清洗装置中必须设置过滤器，对清洗液进行严格的过滤，因此过滤系统在清洗机中占有重要地位。根据过滤工艺、过滤精度不同，过滤器可分为转鼓过滤器、纸带过滤器、袋式过滤器以及技术好的自清洁式过滤器。

Its cleaning system is responsible for the cleaning of components and is the core of the entire cleaning machine. The differences between universal, flexible, ultrasonic and other cleaning machines based on different principles are mainly reflected in the cleaning system. There are various cleaning system processes, such as spray cleaning systems, which have high and low pressure spray cleaning processes according to different parts and different cleaning requirements of the same part, as well as insertion and blocking cleaning processes in fixed point and positioning cleaning. To improve the cleanliness of parts and component assemblies, filters must be installed in the cleaning device to strictly filter the cleaning solution. Therefore, the filtering system plays an important role in the cleaning machine. According to different filtration processes and filtration accuracy, filters can be divided into drum filters, paper tape filters, bag filters, and technically advanced self-cleaning filters.

超高压清洗机的技术优势：

Technical advantages of ultra-high pressure cleaning machines:

(1)清洗质量好

(1) Good cleaning quality

清洗管道及热交流器内孔时，能将管内的结垢物和梗塞物全部剔除洁净，可见到金属本体。具有较大的能量且以超音速运动的高压水射流，完整可以毁坏坚硬结垢物和梗塞物，但对金属没有任何毁坏作用。同时又由于高压水的压力小于金属或钢筋混凝土的抗压强度等级，高压水射流清洗不会损伤被清洗基体。

When cleaning the pipes and the inner holes of the heat exchanger, all scale and infarcts inside the pipes can be removed and cleaned, and the metal body can be seen. A high-pressure water jet with high energy and supersonic motion can completely destroy hard scaling and blockages, but has no destructive effect on metals. At the same time, due to the pressure of high-pressure water being lower than the compressive strength level of metal or reinforced concrete, high-pressure water jet cleaning will not damage the cleaned substrate.

(2)清洗速度快

(2) Fast cleaning speed

由于水射流的冲刷、楔劈、剪切、磨削等复合破碎作用，可疾速将结垢物打碎零落，比传统的化学办法、喷砂抛丸办法、简单机械及手工办法清洗速度快几倍到十几倍。同时，采用高压水射流清洗后的部件，无需停止二次干净处置;而化学清洗后，则需用清水将外表的化学药剂清洗掉。

Due to the combined crushing effects of water jet erosion, wedge splitting, shearing, and grinding, scaling can be quickly broken and scattered, which is several to ten times faster than traditional chemical methods, sandblasting and shot blasting methods, simple mechanical and manual methods for cleaning. At the same time, after using high-pressure water jet cleaning, there is no need to stop secondary cleaning and disposal of the components; After chemical cleaning, the surface of the chemical agent needs to be cleaned with clean water.

(3)无环境污染

(3) No environmental pollution

由于是以清水为介质，因此水射流清洗不像喷砂抛丸及简单的机械清洗那样产生大量粉尘，污染大气环境，损伤人体安康；也不像有些化学清洗那样，产生大量废液污染河道、土质和水质。以清水为介质水射流，无臭、无味、无毒，喷出的射流雾化后，还可降低作业区的空气粉尘浓度，降低到国度规则的平安规范以下，因而不会形成任何污染。此外，超高压清洗机的清洗液的回收在技术上也相对容易完成。

Due to the use of clean water as the medium, water jet cleaning does not generate a large amount of dust like sandblasting and simple mechanical cleaning, polluting the atmospheric environment and damaging human health; Unlike some chemical cleaning methods, which generate a large amount of waste liquid to pollute rivers, soil, and water quality. Using clear water as the medium for water jet, it is odorless, odorless, and non-toxic. After atomization, the sprayed jet can also reduce the air dust concentration in the work area to below the national safety regulations, thus avoiding any pollution. In addition, the recovery of cleaning fluid from ultra-high pressure cleaning machines is relatively easy to complete technically.

有了超声波清洗机上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.sinokohl.com或者来电咨询，我们会尽全力为您解决

With the summary on thehttp://www.sinokohl.com ultrasonic cleaning machine, I hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.sinokohl.com Or call for consultation, and we will do our best to solve it for you