实验室超声波清洗机是一种高效、环保的清洗设备，广泛应用于实验室、科研机构、医院等场所。正确使用不仅可以延长设备的使用寿命，还能确保实验结果的准确性和可靠性。

Laboratory ultrasonic cleaning machine is an efficient and environmentally friendly cleaning equipment widely used in laboratories, research institutions, hospitals and other places. Proper use not only extends the service life of the equipment, but also ensures the accuracy and reliability of experimental results.

1、确认清洗物品

1. Confirm cleaning items

在使用前，应确认要清洗的物品是否适合超声波清洗，如玻璃器皿、金属零件、宝石等。一些不适合超声波清洗的物品，如塑料制品、电子元件等，应避免放入清洗机中。

Before use, it should be confirmed whether the items to be cleaned are suitable for ultrasonic cleaning, such as glassware, metal parts, gemstones, etc. Some items that are not suitable for ultrasonic cleaning, such as plastic products, electronic components, etc., should be avoided from being placed in the cleaning machine.

2、检查设备状态

2. Check device status

在使用前，应检查超声波清洗机是否处于正常工作状态。检查内容包括电源线是否完好、插头是否松动、水箱内是否有水、清洗槽是否干净等。

Before use, check if the ultrasonic cleaning machine is in normal working condition. The inspection includes checking whether the power cord is intact, whether the plug is loose, whether there is water in the water tank, and whether the cleaning tank is clean.

3、物品摆放

3. Item placement

将待清洗的物品放入清洗槽内，摆放时应注意不要遮挡超声波振子，以免影响清洗效果。同时，应避免将物品堆叠在一起，以免影响清洗效果和物品的干燥。

Put the items to be cleaned into the cleaning tank, and be careful not to block the ultrasonic oscillator during placement to avoid affecting the cleaning effect. At the same time, items should be avoided from being stacked together to avoid affecting the cleaning effect and drying of the items.

4、加入适量清洗剂

4. Add an appropriate amount of cleaning agent

根据要清洗的物品和污渍情况，加入适量的清洗剂。清洗剂过多会影响超声波清洗效果，过少则可能导致清洗不彻底。

Add an appropriate amount of cleaning agent according to the items to be cleaned and the situation of stains. Excessive cleaning agent can affect the ultrasonic cleaning effect, while insufficient cleaning agent may lead to incomplete cleaning.

5、启动设备

5. Start device

将设备插上电源，打开开关，设备开始工作。根据要清洗的物品和污渍情况，选择合适的清洗时间。一般来说，清洗时间不宜过长，以免对物品造成损害。

Insert the device into the power supply, turn on the switch, and the device will start working. Choose an appropriate cleaning time based on the items to be cleaned and the condition of stains. Generally speaking, the cleaning time should not be too long to avoid damage to the items.

6、观察清洗过程

6. Observing the cleaning process

设备工作时，观察清洗过程，注意是否有异常情况出现，如泡沫过多、气味难闻等。如有异常情况，应立即切断电源，停止使用，并及时联系维修人员。

When the equipment is working, observe the cleaning process and pay attention to whether there are abnormal conditions, such as excessive foam and unpleasant smell. If there is any abnormal situation, the power should be immediately cut off, the use should be stopped, and maintenance personnel should be contacted in a timely manner.

更多的关于超声波清洗机的问题或者详细的内容，请进入我们公司的网站：http://www.sinokohl.com 网站中会有很多的内容仅供参考。

For more questions or detailed information about ultrasonic cleaning machines, please visit our company's website: http://www.sinokohl.com There will be a lot of content on the website for reference only.