高压喷淋清洗机是对工件通过清洗、漂洗、切水、烘干等工艺以达到工件表面无油污、铝屑、水分的目的。本机需将清洗的工件放置在清洗机上料口专门设计的定位工装上，通过高压水喷淋清洗、漂洗达到工件表面清洁的效果，再通过压缩空气风切去除工件表面的大部分水分，然后进入热风干燥工位，对工件进行烘干，处理工件表面残留水分;经冷风冷却后，回到上下料工位，人工将工件取出，完成整个清洗过程。清洗完成后，保证工件表面无污物及水珠。
High pressure spray cleaning machine is used to clean, rinse, cut water, and dry the workpiece to achieve the goal of no oil, aluminum chips, and moisture on the surface of the workpiece. The machine places the workpieces to be cleaned on the positioning tooling specially designed for the feeding port of the cleaning machine. The surface of the workpieces is cleaned by high-pressure water spraying and rinsing, and then most of the moisture on the surface of the workpieces is removed by compressed air cutting, and then enters the hot air drying station to dry the workpieces and deal with the residual moisture on the surface of the workpieces; After being cooled by cold air, return to the loading and unloading station and manually take out the workpiece to complete the whole cleaning process. After cleaning, ensure that the workpiece surface is free of dirt and water drops.
一、清洗特点
1、 Cleaning characteristics
清洗节拍快，效果统一，不会对工件造成磨损;设备中每个环节的工作时间、温度和功率可以按需设置;设备上料采用双确认按钮，并配有安全光栅，确保操作人员安全;独立控制柜，上下料工位处配有悬臂控制面板。
The cleaning rhythm is fast, the effect is uniform, and the workpiece will not be worn; The working time, temperature and power of each link in the equipment can be set as required; Double confirmation buttons are used for equipment loading, and safety gratings are provided to ensure the safety of operators; Independent control cabinet, equipped with cantilever control panel at the loading and unloading station.
二、设备组成
2、 Equipment composition
SUS304高级不锈钢清洗储液箱、 高压水泵、化工泵、管道泵，均按照客户需求量身定做。可连续长时间工作、内置式安全发热系统、可调式温度控制系统、安全及操作简便、可按客户要求设计及制造 。
SUS304 high-grade stainless steel cleaning reservoir, high-pressure water pump, chemical pump and pipeline pump are all customized according to customer needs. It can work continuously for a long time, built-in safe heating system, adjustable temperature control system, safe and easy to operate, and can be designed and manufactured according to customer requirements.

(1)可大批量连续自动作业。
(1) Large batch continuous automatic operation is available.
(2)适用于简单结构及管件制品清洗。
(2) It is suitable for cleaning simple structures and pipe fittings.
(3)可采用镀锌及不锈钢外壳，内部配喷淋管道，封闭经过式通道。整机为全封闭结构，采用不锈钢或(方通)骨架焊接而成，清洗机上罩部分采用单层结构，采用不锈钢钢板制作，外贴有保温层，降低能耗。
(3) Galvanized and stainless steel shells can be used, with spray pipes inside, and closed passage. The whole machine is a fully enclosed structure, which is welded with stainless steel or (Fangtong) skeleton. The upper cover of the cleaning machine is a single-layer structure, which is made of stainless steel plate, and is covered with a thermal insulation layer to reduce energy consumption.
储液箱采用单层结构，采用SUS304不锈钢板制作;内部用隔板分成几个区域，分别实现对清洗液的过滤、铁屑的沉淀、滤油、分油;储液箱设有补水口、排液口、溢水口。底部为两边向中间倾斜，清洗液从液箱底部的排液口集中排出。
The liquid storage tank is of single-layer structure and made of SUS304 stainless steel plate; The inner part is divided into several areas with a partition board to filter the cleaning solution, precipitate iron filings, filter oil and separate oil; The liquid storage tank is provided with a water make-up port, a liquid discharge port and an overflow port. The bottom is inclined from both sides to the middle, and the cleaning solution is discharged from the drain port at the bottom of the tank.
液箱装有液位控制器，液位异常时及时提醒补水、停水。异常情况实现紧急停机。
The liquid tank is equipped with a liquid level controller, which will timely remind to replenish and stop water when the liquid level is abnormal. Emergency shutdown shall be realized under abnormal conditions.
防锈箱内部装有不锈钢电加热器，在30～60分钟内将液体由室温升至使用温度。温度自动控制在10～90℃范围，人工设定、自动控制。设有温控仪表自动显示。液箱外贴保温棉，防止热量散发。
Stainless steel electric heater is installed inside the rust proof box to raise the liquid temperature from room temperature to service temperature within 30~60 minutes. The temperature is automatically controlled within the range of 10~90 ℃, manually set and automatically controlled. It is equipped with temperature control instrument for automatic display. The external surface of the tank is covered with insulating cotton to prevent heat emission.
三、清洗优势
3、 Cleaning advantages
在所有的清洗方式中，喷淋清洗机是效率高、效果统一的一种方式，之所以喷淋清洗机能够达到如此的效果，是与它独特的工作原理和清洗方法密切相关的。我们知道，在生产和生活当中，需要清洗的工件种类和环节也很多，如：物件的清除油污、灰尘、表面防锈等，常见的手工清洗方法速度慢、成本高。而喷淋清洗机则可以对工件批量清洗，效果统一、可控性强，低成本，因此，喷淋清洗机被日益广泛应用于各行各业。
In all cleaning methods, spray cleaning machine is a way with high efficiency and uniform effect. The reason why spray cleaning machine can achieve such effect is closely related to its unique working principle and cleaning method. We know that in production and life, there are many types and links of workpieces that need to be cleaned, such as removing oil stains, dust, surface rust prevention, etc. Common manual cleaning methods are slow and costly. The spray washer can clean the workpieces in batches with uniform effect, strong controllability and low cost. Therefore, the spray washer is increasingly widely used in all walks of life.
高压喷淋清洗机具有功能全，结构合理，操作方便，清洗效果好,对于大批量工件的清洗，改善劳动环境，提高清洗质量，具有重要意义。
High pressure spray cleaning machine has full functions, reasonable structure, convenient operation and good cleaning effect. It is of great significance for cleaning large quantities of workpieces, improving the working environment and improving the cleaning quality.
以上就是为大家介绍的有关工业超声波清洗机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sinokohl.com
The above is a detailed introduction of the industrial ultrasonic cleaning machine for you, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.sinokohl.com