目前，发动机油通道去毛刺一般使用手工和专用去毛刺机。由于油直径(8-16mm)小，长度(500-1100mm)长，手动或刷子结构无法可靠地探测油孔，去毛刺效果达不到预期目标。用刷子去除毛刺会导致毛刺不干净、工件刮花、毛刺起雾等问题。使用完全渗透方式，所需的力较大，但由于空间限制，延长杆对毛刺的力较小，无法保证去毛刺效果。

At present, manual and special deburring machines are generally used for deburring engine oil passages. As the oil diameter (8-16mm) is small and the length (500-1100mm) is long, the manual or brush structure cannot reliably detect the oil hole, and the deburring effect cannot reach the expected goal. Using a brush to remove burrs will lead to problems such as unclean burrs, scratched workpieces, and fogged burrs. The force required for complete penetration elimination is large, but due to space limitation, the force of the extension rod on the burr is small, and the burr removal effect cannot be guaranteed.

高压水去毛刺技术不仅可以完成油污去毛刺，还可以通过清洗机的水处理系统回收使用过的水，实现快速稳定，满足生产线的大量生产需求。原理是水被高压泵加压，然后通过高压管道到达高压喷嘴，以扇形或锥形喷出。强大冲击力作用于零件，产生去毛刺效果。高压水去毛刺方法是机器人将工件发送到指定车间，然后用安装在清洗机机身上的高压水去毛刺装置去毛刺。

High pressure water deburring technology can not only complete oil deburring, but also recover used water through the water treatment system of the cleaning machine to achieve rapid and stable production and meet the mass production needs of the production line. The principle is that water is pressurized by a high-pressure pump, and then flows through a high-pressure pipe to a high-pressure nozzle, where it is ejected in a fan or cone shape. The powerful impact force acts on the parts to produce deburring effect. The method of high-pressure water deburring is that the robot sends the workpiece to the designated workshop, and then deburring with the high-pressure water deburring device installed on the body of the cleaning machine.

当机械手移动工件使高压喷嘴完全探入油路时，高压水路接通，高压马蹄打开，不小于30 MPa的高压水通过液压管注入高压喷嘴。机械手夹紧工件，上下移动，使高压水刀作用于油路中的毛刺，去除毛刺。导向从动件与工件同步上下移动，高压水的振动引起的高压喷嘴的摆动得到校正。当工件往复运动时，高压水道保持流动。用过的水通过清洗机的水处理系统循环使用。当机械手、升降机构和高压水路完成设定动作时，高压马蹄开始卸载，导轨从动件复位，完成一个油去毛刺的工作循环。

When the manipulator moves the workpiece to make the high-pressure nozzle fully penetrate into the oil circuit, the high-pressure water circuit is connected, the high-pressure horseshoe is opened, and the high-pressure water not less than 30 MPa is injected into the high-pressure nozzle through the hydraulic pipe. The manipulator clamps the workpiece and moves up and down to make the high-pressure water cutter act on the burr in the oil path to remove the burr. The guide follower moves up and down synchronously with the workpiece, and the swing of the high-pressure nozzle caused by the vibration of high-pressure water is corrected. When the workpiece moves back and forth, the high-pressure water channel keeps flowing. The used water is recycled through the water treatment system of the washer. When the manipulator, lifting mechanism and high-pressure water circuit complete the setting action, the high-pressure horseshoe starts to unload, and the guide rail follower resets, completing a working cycle of oil deburring.

目前，在工业生产，大多数金属工件在切割后往往会产生局部或局部毛刺，如果不去除会引起许多不必要的麻烦。

At present, in industrial production, most metal workpieces often produce local or local burrs after cutting, which will cause many unnecessary troubles if not removed.

高压水去毛刺技术是近年来逐渐成熟的新型清洗技术。 具有投资少、易自动化、等优点。 使用高压水洗机去除毛刺，也可以轻松去除无法手动处理或难以处理的地方。 这个问题用高压水去除毛刺可以很容易地。

High pressure water deburring technology is a new type of cleaning technology which is gradually mature in recent years. It has the advantages of less investment, easy automation, environmental protection, etc. Use a high-pressure water washer to remove burrs, or easily remove places that cannot be handled manually or are difficult to handle. This problem can be easily solved by deburring with high-pressure water.

以上是为大家介绍的有关高压去毛刺清洗机详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sinokohl.com

The above is a detailed introduction to the high-pressure deburring cleaning machine. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.sinokohl.com