超声波清洗机不震动可能存在的5大原因：
There are five possible reasons why the ultrasonic cleaner does not vibrate:
电源是否完好，看看超声波发生器有电进来没，面板无显示的话，查查进来的电源有问题没有；
Check whether the power supply is in good condition. Check whether the ultrasonic generator has power. If there is no display on the panel, check whether there is any problem with the power supply;
超声波发生器灰尘过多，或受潮，导致一些电路不畅，需清理超声波发生器内部；
There is too much dust or moisture in the ultrasonic generator, which causes some circuits to be blocked. It is necessary to clean the inside of the ultrasonic generator;
超声波清洗机的使用寿命过长，导致超声波换能器已经老化，需要更换全新换能器；
The service life of the ultrasonic cleaning machine is too long, resulting in the aging of the ultrasonic transducer, which needs to be replaced with a new one;
超声波发生器后面的保险丝或线路板上的保险丝是否烧掉；
Whether the fuse behind the ultrasonic generator or the fuse on the circuit board is burnt out;
超声波换能器经过长期高温清洗，可能有脱胶或者胶水开裂现象。
After long-term high-temperature cleaning, the ultrasonic transducer may have degumming or glue cracking.

超声波清洗机震动小的5大原因：
Five reasons for low vibration of ultrasonic cleaner:
使用时间比较长，换能器老化，性能衰减，维修方法可以适当增大超声波功率，但是这种方法会造成换能器的发热量增大，不能根本问题，建议更换全部换能器；
The service time is relatively long, the transducer is aging, the performance is decaying, and the maintenance method can appropriately increase the ultrasonic power, but this method will increase the heat output of the transducer, which cannot fundamentally solve the problem. It is recommended to replace all the transducers;
超声波发生器与换能器频率点跑偏；
The frequency point of ultrasonic generator and transducer deviates;
部分换能器损坏，将坏的换能器更换于之匹配的换能器；
Some transducers are damaged. Replace the damaged transducer with the matched transducer;
清洗机工作环境，比如清洗剂种类，清洗温度，液位深浅等的影响；
The impact of the working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level depth, etc;
被清洗物的摆放方式，清洗剂的更换等。
The placement of the cleaned objects, the replacement of cleaning agents, etc.
综上所述，造成超声波清洗机不震动或者振动小，很大几率都是超声波换能器和超声波发生器的问题，且一般而言如果购买的是一台质量合格的超声波清洗设备，那么出问题的几率是很小的，并且质量好的超声波清洗机其厂家售后一般也是优良的，完全不用担心遇到故障无法处理。
To sum up, the reason why the ultrasonic cleaning machine does not vibrate or vibrates little is the problem of the ultrasonic transducer and the ultrasonic generator. Generally speaking, if you buy a qualified ultrasonic cleaning equipment, the probability of the problem is very small, and the after-sales service of the manufacturer of the ultrasonic cleaning machine with good quality is generally excellent, so you don't have to worry about the failure.
有了超声波清洗机上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.sinokohl.com或者来电咨询，我们会尽全力为您
With the summary above, we hope to help our customers. If you have any questions or need help, please click our website: http://www.sinokohl.com Or call for consultation, and we will do our best to solve it for you