Because the ultrasonic cleaning equipment adopts the pure physical cleaning method, which can efficiently clean the concave and convex parts and deep holes of the equipment through ultrasonic waves, many users begin to use the ultrasonic cleaning equipment with good value instead of other types of cleaning equipment. Although the operation of the ultrasonic equipment is not difficult, the user still needs to pay strict attention to the following points in order to give play to the large cleaning effect of the equipment.

1.水槽中有溶质才能运行设备

1. Only when there is solute in the water tank can the equipment be operated

操作人员使用超声波清洗设备时，一定注意清洗设备水槽内需加入溶质或者水，切勿空转操作导致设备损毁，对于配备加热系统的超声波设备，在水槽能没有溶质时也不要随意打开加热按钮。

When using ultrasonic cleaning equipment, operators must pay attention to adding solute or water into the water tank of the cleaning equipment. Do not damage the equipment due to idling operation. For ultrasonic equipment equipped with heating system, do not open the heating button at will when there is no solute in the water tank.

2.使用过程中注意保护缸底

2. Pay attention to protecting the cylinder bottom during use

操作人员在放入需要清洁的物品时一定要轻轻放入，不可直接扔进水槽，以免造成缸底物理性损坏或者导致设备转换器晶片严重损坏，使用过程中若发现缸底污垢较多时，应及时清理超声波清洗设备，以免影响清洗效果。

Operators must gently put in the items to be cleaned, and cannot directly throw them into the water tank, so as to avoid physical damage to the cylinder bottom or serious damage to the equipment converter wafer. If there is much dirt on the cylinder bottom during use, the ultrasonic cleaning equipment shall be cleaned in time to avoid affecting the cleaning effect.

3.使用过程注意人身

3. Pay attention to personal safety during use

用户在操作超声波清洗设备时一定注意不要将身体任何部位放入水槽中，因为超声波会对皮肤造成一定的伤害，若用户需要换新液时，等超声波清洗设备完全启动后，方可开始进行零部件的清洗工作。还有一定需要用户注意的是，清洗剂切不可使用易燃易爆的汽油、酒精等溶剂，这类溶剂因其沸点低、易挥发很容易造成生产事故引发人员伤亡。

When operating the ultrasonic cleaning equipment, the user must pay attention not to put any part of the body into the water tank, because the ultrasonic wave will cause certain damage to the skin. If the user needs to change the new liquid, the cleaning of parts and components can be started after the ultrasonic cleaning equipment is fully started. It is also necessary for users to note that flammable and explosive gasoline, alcohol and other solvents should not be used as cleaning agents. Such solvents are easy to cause production accidents and casualties due to their low boiling point and easy volatilization.

物美价廉的超声波清洗设备出厂时通常会配备详细的操作说明，操作人员在实际操作超声波清洗设备过程中，只有严格按照操作规程进行设备的操作，并注意设备运行过程水槽水位合适、投入取件轻拿轻放保护好缸底晶片、保护好自身人身，精心操控每个环节，能更大限度的降低失误率、延长超声波清洗设备使用寿命并为企业创造更高的价值。

The high-quality and inexpensive ultrasonic cleaning equipment is usually equipped with detailed operating instructions when it leaves the factory. During the actual operation of the ultrasonic cleaning equipment, the operators can only operate the equipment in strict accordance with the operating procedures, and pay attention to the proper water level of the water tank during the operation of the equipment, take and handle the parts with care to protect the wafers at the bottom of the cylinder, protect their personal safety, and carefully control each link to reduce the error rate Extend the service life of ultrasonic cleaning equipment and create higher value for enterprises.

以上是为大家介绍的有关山东超声波清洗机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sinokohl.com

The above is the detailed introduction of Shandong ultrasonic cleaning machine. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.sinokohl.com