今天要和大家探讨的是真空碳氢清洗机是否可以清洗金属波纹管，不熟悉它的人可能想象不出来波纹管的样子，熟悉的人一听到“波纹管”三个字，立马能在脑海里浮现出它的外型。是的，没错，你可以把它往弹簧的方向想象，市面上常见的金属波纹管有以下材质：铝制、304不锈钢、碳钢等。波纹管在自动化智能制造业、机械行业、电力工业、交通运输等行业应用广泛，因此，人们对它的需求量也非常大，因此，相关厂家也会大批量生产各式各样的金属波纹管。

　　Today, we will discuss whether vacuum hydrocarbon cleaning machines can clean metal bellows. Those who are not familiar with it may not be able to imagine what a bellows looks like, but those who are familiar with it can instantly visualize its appearance upon hearing the word "bellows". Yes, that's right, you can think of it in the direction of a spring. Commonly seen metal bellows on the market are made of aluminum, 304 stainless steel, carbon steel, etc. Bellows are widely used in automated intelligent manufacturing, machinery industry, power industry, transportation, and other industries. Therefore, there is a high demand for them, and relevant manufacturers also produce a wide range of metal bellows in large quantities.

　　波纹管有尺寸较大的，也有尺寸较小的。体积比较大的那种波纹管就不适合拿设备洗，我们就来讲常见的中小型尺寸的波纹管吧。波纹管的外形跟弹簧相似，但弹簧有缝隙，波纹管没有，生产出来的波纹管表面不可能是一尘不染的，往往会有一层冲压油脂、拉伸油脂等附着在其表面上，这些油脂也混合了矿物油以及防锈油等。刚生产出来，用指腹去触摸表面，手指会油腻腻的，根本无法正常使用，因此，就要用到工业清洗。可以选择的超声波清洗设备是真空碳氢清洗机，其除油除污特点是业界公认的——洁净度达标！真空碳氢清洗设备是工业用的超声波清洗机，最近几年较为流行，因为其环保、洁净度高、清洗高效等特点，上至千人工厂，下至几十人工厂，都要采购一台放到车间使用。碳氢真空清洗机开机预热后，油污较轻的波纹管清洗时间一般是3分钟，如果油污稍微重一点，就可以将清洗时间设置成5分钟，烘干后，再去抽查洁净度，合格率为99.999%。

　　Corrugated tubes come in various sizes, ranging from large to small. The larger ones are not suitable for washing with equipment, so let's focus on the common small and medium-sized corrugated tubes. The appearance of corrugated tubes resembles that of springs, but unlike springs which have gaps, corrugated tubes do not. The surface of the produced corrugated tubes cannot be completely spotless, often with a layer of stamping grease, stretching grease, etc. attached to it. These greases also contain mineral oil and rust preventive oil. When touched with the fingertips just after production, the fingers will feel greasy, making it impossible to use normally. Therefore, industrial cleaning is necessary. An optional ultrasonic cleaning device is the vacuum hydrocarbon cleaning machine, which is widely recognized in the industry for its oil and dirt removal capabilities - achieving high cleanliness standards! Vacuum hydrocarbon cleaning machines are ultrasonic cleaning machines for industrial use, and have become popular in recent years due to their environmental friendliness, high cleanliness, and efficient cleaning. Factories ranging from those with thousands of employees to those with just a few dozen all procure one for use in their workshops. After the hydrocarbon vacuum cleaning machine is preheated, the cleaning time for corrugated tubes with lighter oil stains is generally 3 minutes. If the oil stains are slightly heavier, the cleaning time can be set to 5 minutes. After drying, a spot check on cleanliness is conducted, with a pass rate of 99.999%.

　　金属波纹管的产量一般很大，所以四个槽体的真空碳氢清洗机是比较适合大部分工厂使用的，用我们行业内的话就叫四工位超声波碳氢清洗设备，因为每个工位的功能都不一样。1号工位（清洗槽）是碳氢溶剂+超声波粗清洗，2号工位（清洗槽）是碳氢溶剂+超声波精清洗，3号工位是用市水鼓泡漂洗，最后是热风烘干。前面两个工位我们都提到了碳氢清洗剂+超声波清洗，其实也是我们常说的，振子的电能转化为机械能，通过机械震动的冲击力震落附着在波纹管表面的油脂，在碳氢清洗剂的辅助作用下，彻底溶解工件表面的油脂。真空碳氢清洗机是一台全自动智能清洗设备，只要一个人操作即可，如果物料多，可适当增人上下料，但基本上都只要一个人操作就可以，因此，省下来的人工成本非常可观！

　　The output of metal bellows is generally large, so the vacuum hydrocarbon cleaning machine with four tanks is suitable for most factories. In our industry, it is called a four-station ultrasonic hydrocarbon cleaning equipment because each station has a different function. Station 1 (cleaning tank) is for hydrocarbon solvent + ultrasonic rough cleaning, Station 2 (cleaning tank) is for hydrocarbon solvent + ultrasonic fine cleaning, Station 3 is for bubbling rinsing with tap water, and finally, hot air drying. We mentioned hydrocarbon cleaning agent + ultrasonic cleaning for the first two stations. In fact, as we often say, the electrical energy of the transducer is converted into mechanical energy, and the impact force of mechanical vibration shakes off the grease attached to the surface of the bellows. With the assistance of the hydrocarbon cleaning agent, the grease on the surface of the workpiece is completely dissolved. The vacuum hydrocarbon cleaning machine is a fully automatic intelligent cleaning equipment that can be operated by one person. If there are many materials, additional personnel can be added for loading and unloading, but basically, only one person is needed for operation. Therefore, the labor cost saved is very considerable!

　　本文由 碳氢清洗机  友情奉献.更多有关的知识请点击  http://www.sinokohl.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is kindly contributed by Carbon Hydro Cleaning Machine. For more relevant knowledge, please visit http://www.sinokohl.com/ with a sincere attitude. We will provide you with comprehensive services and will continue to share more relevant knowledge with you Stay tuned