服务热线电话
400-6188-756
喷淋清洗机清洗的彻底吗?
来源:http://www.sinokohl.com/ 时间: 2025-10-23 浏览次数: 0
在使用喷淋清洗机清洗手术器械时,关节、咬合处等复杂结构部位容易残留污染物(如血液、组织等)是清洗质量控制的重点、难点。
When using a spray cleaning machine to clean surgical instruments, complex structural parts such as joints and bite points are prone to residual pollutants (such as blood, tissue, etc.), which is the focus and difficulty of cleaning quality control.
装载时须将器械的关节完全打开,咬合部分打开,可拆卸的部分拆卸后装载清洗,同时、器械的摆放要避免遮挡和重叠,确保所有部位能够充分暴露在喷淋水流下。
When loading, the joints of the equipment must be fully opened, the bite part must be opened, and the detachable parts must be disassembled before loading and cleaning. At the same time, the placement of the equipment should avoid obstruction and overlap, ensuring that all parts can be fully exposed to the spray water flow.
但喷淋清洗真的能彻底清洗干净吗?
But can spray cleaning really thoroughly clean?
我们做个实验观察一下:
Let's conduct an experiment to observe:
将器械关节打开涂抹模拟污染物后固定在篮筐底部,放入清洗消毒器内,先进行喷淋清洗、再进行超声波清洗,用视频记录清洗全过程。
Open the joint of the instrument and apply simulated pollutants, then fix it at the bottom of the basket and place it in a cleaning and disinfection device. First, perform spray cleaning, followed by ultrasonic cleaning, and record the entire cleaning process with video.
经过喷淋清洗后,肉眼可见器械表面的模拟污染物基本去除,但关节处仍有模拟污染物残留。
After spray cleaning, the simulated pollutants on the surface of the instrument visible to the naked eye were basically removed, but there were still residual simulated pollutants at the joints.
再进行超声波清洗,清洗过程中可观察到模拟污染物逐渐分解、剥离。
Further ultrasonic cleaning can be performed, during which simulated pollutants can be observed gradually decomposing and peeling off.
超声波清洗前后的效果对比
Comparison of the effect before and after ultrasonic cleaning
结论:
Conclusion:
喷淋清洗机能够快速高效的去除器械表面的污渍,但细小缝隙中的污渍去除能力不足,超声波清洗能够弥补这一问题。故建议:常规器械定期开展超声波处理,以去除关节处、咬合齿口部等顽固的污渍。
Spray cleaning machine can quickly and efficiently remove stains on the surface of instruments, but its ability to remove stains in small gaps is insufficient. Ultrasonic cleaning can make up for this problem. Therefore, it is recommended to regularly perform ultrasonic treatment on conventional instruments to remove stubborn stains such as joints and bite teeth.
本文由 喷淋清洗机 友情奉献.更多有关的知识请点击 http://www.sinokohl.com/ 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendly contribution from the spray cleaning machine For more related knowledge, please click http://www.sinokohl.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
相关文章
-
CNC高压清洗机的日常维护需要检查以下11个方面 2025-10-28
-
通过式清洗机助力金属线材产线“跑”起来! 2025-10-26
-
单工位旋转喷淋清洗机常规故障及排除方法 2025-10-25
-
全自动多槽超声波清洗机操作流程与注意事项 2025-10-24
-
喷淋清洗机清洗的彻底吗? 2025-10-23
-
全自动多槽超声波清洗机能用来干什么? 2025-10-22
-
通过式超声波清洗机工业除锈应用指南 2025-10-21
-
全自动多槽超声波清洗机的终极答案:一份让工程师大开眼界的10大应用清单 2025-10-20
-
喷淋清洗机:如何有效提高喷淋清洗效果,你知道吗? 2025-10-07
-
多槽式超声波清洗机:高效清洗的得力助手 2025-10-06

新闻中心




行业新闻







鲁公网安备37011202000628号