The principle of the ultrasonic cleaning machine is to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through the transducer, and radiate the ultrasonic wave into the cleaning solution in the tank through the cleaning tank wall.

超声波清洗机的功率减弱的原因如下：

The reasons for the power reduction of the ultrasonic cleaning machine are as follows:

超声波清洗机主要原因是机器设备使用时间过长，变频调速器逐渐老化，特性降低。维修方式可以选择提高超声波输出功率，但是这种方式的维修治标不治本，很容易使换能器的热量增加，从而使机器损坏。

The main reason for the ultrasonic cleaning machine is that the machine and equipment have been used for a long time, the frequency converter is aging gradually, and the characteristics are reduced. The maintenance method can choose to increase the ultrasonic output power, but this method can cure the symptoms rather than the root causes, which can easily increase the heat of the transducer and damage the machine.

超声波清洗机的换能器吸湿受潮，绝缘电阻正常或部分损坏，这种情况下好的选择还是拆换毁坏的传感器。其他的原因嗨哟，电缆是不是外部损坏或吸湿，供电电压过低。超声波清洗机传感器不处于脱皮、脱胶状态，超声波清洗机的底端不受吸振材料或工件的干扰。环内的电源可以移动其工作点并重新调整工作点。

The transducer of the ultrasonic cleaning machine is hygroscopic and damp, and the insulation resistance is normal or partially damaged. In this case, the best choice is to replace the damaged sensor. For other reasons, the cable is not externally damaged or hygroscopic, and the power supply voltage is too low. The sensor of the ultrasonic cleaning machine is not in the peeling and degumming state, and the bottom end of the ultrasonic cleaning machine is not disturbed by vibration absorbing materials or workpieces. The power supply in the ring can move its operating point and readjust its operating point.

超声波清洗机如果输出功率低或减弱，请先检查传感器是否有问题。如果无法判断原因，应停止使用超声波清洗机，不要再使用。

If the output power of the ultrasonic cleaning machine is low or weakened, please first check whether there is a problem with the sensor. If the cause cannot be determined, stop using the ultrasonic cleaning machine and do not use it again.

超声波清洗机的功率减弱的原因主要是上面介绍的这些，我们大家都需要懂得我们这种超声波清洗机的功率减弱的原因。

The main reasons for the power reduction of the ultrasonic cleaning machine are the above. We all need to understand the reasons for the power reduction of our ultrasonic cleaning machine.

本文的精彩内容由全自动超声波清洗机提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入:http://www.sinokohl.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by the knowledge of automatic ultrasonic cleaning machine. There are many wonderful content on this website. You can click to enter more content: http://www.sinokohl.com We have special customer service to answer your questions